EG6B41J British standard normally closed pneumatic rubber lined diaphragm valve

EG6B41J British standard normally closed pneumatic rubber lined diaphragm valve
  • sell：021-32051999
  • sell：021-32050777
  • fax：021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

Product description of EG6B41J British standard closed pneumatic diaphragm valve


Design and manufacture: GB12239 or BS5156


Structure length: GB12221 or BS5156


Flange joint size: GB4216.4 or BS4504


Test and inspection: GB/T13927 or BS5156


Material of main parts


Body: cast iron, ductile iron, carbon steel, stainless steel.


Bonnet: cast iron, ductile iron, carbon steel, stainless steel.


Lining: no lining, rubber.


Diaphragm: Rubber


Disc: cast iron and carbon steel.


Stem: carbon steel, stainless steel


Hand wheel: Cast Iron


test


Lining layer: EDM test


Test and inspection according to BS6755 standard


Nominal pressure: PN (MPa)


Valve body: PN * 1.5


Sealing: PN x 1.1


Structural characteristics


Diaphragm valve is a special type of globe valve.


1. the opening and closing part of the elastic seal ensures that there is no internal leakage.


2. the streamlined flow path makes the pressure loss small.


3. there is no stuffing box, so there is no leakage.


4. The valve body and cover are separated by the middle diaphragm, so that the valve cover above the diaphragm, the valve stem and other parts are not eroded by the medium.


5. the diaphragm can be replaced and the maintenance cost is low.


6. The variety of lining materials can be applied to various media, and has the characteristics of high strength and good corrosion resistance.


EG6B41J pneumatic normally closed type rubber-lined diaphragm valve, EG6B41J-10, EG6B41J-6 type rubber-lined valve is used to change the channel section and the direction of media flow, with diversion, cut-off, adjustment, throttling, check, diversion or overflow functions. Valves can be used to control the flow of water, steam, oil, gas, mud, various corrosive media, liquid metals and radioactive fluids and other fluids.


Performance specification


型號
公稱壓力
PN（Mpa）
試驗壓力PS（Mpa）
適用介質
工作溫度（℃）
EG6B41WJF-6
0．6
0．9
0．66
W．非腐蝕性流體
J·一般腐蝕性流體
FS。強酸堿及各種有機溶劑
（溶融堿金屬元素氧除外）
≤100
≤85
≤150
EG6B41WJF-10
1．0
1．5
1．1
EG6B41WJF-16
1．6
2．4
1．76


Parts List: 1, Body 2, Body Lining 3, Diaphragm 4, Disc 5, Lower Stem 6, Cover 7, Cylinder 8, Piston 9, Spring 10, Cylinder Head 11, Upper Stem 12, Handwheel
Main shape connection size and weight


型號
公稱通徑
DN（mm）
尺寸（mm）
氣動裝置
重量
（㎏）
L
f
D1
D
D0
n-d
H
B
代號
ES
耗氣量（cm3）
氣源壓力（MPa）
氣源接頭（in）
J型
W型
EG6B41WJF-16
20
121
117
2
75
105
120
4-13．5
168
61
163．87
0．3
1/8
7．2
25
131
127
2
85
115
120
4-13．5
394
168
61
196．65
0．3-0．4
1/8
8．9
32
150
146
2
100
140
120
4-17．5
400
168
61
229．4
0．3-0．4
1/8
10．6
40
163
159
2
110
150
165
4-17．5
485
260
62
1425．7
0．3-0．4
1/4
19．5
50
194
190
2
125
165
165
4-17．5
635
318
63
2284．1
0．3-0．4
1/4
34．9
EG6B41WJF-10
65
220
216
2
145
185
165
4-17．5
650
318
63
3048
0．3-0．4
1/4
39．9
80
258
254
2
160
200
165
8-17．5
660
318
63
3244．7
0．4-0．5
1/4
51．9
100,
309
305
2
180
220
280
8-17．5
816
425
64
6964．5
0．4-0．5
3/8
93．2
125
362
356
3
210
250
280
8-17．5
825
425
64
7439．7
0．4-0．5
3/8
105．3
150
412
406
3
240
285
310
8-22
1013
549
65
14912
0．5
3/8
184．5
EG6B41WJF-6
200
529
521
4
295
340
483
8-22
1300
749
66
49161
0．5
1/2
407．4


Note:


1. Pneumatic diaphragm valves can also be equipped with feedback signals, limiters or positioners to meet the needs of self-proximity control, program control or flow regulation.


2. The feedback signal of pneumatic valves is non-contact sensing technology.


3. Adopt cylinder piston type.


4. When the gas source fails, the handwheel can be operated to open the valve.

The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards：

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service：

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service：

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service：

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.：

a、Structure length；

b、Connection Type；

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range；

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process：

1、Customer purchase list fax to021-33872143，Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google：

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.：

a、Structure length；

b、Connection Type；

c、Nominal diameter, full diameter, reduced diameter, pipe size；

d、Operating medium and temperature, pressure range；

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time.， The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service：

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service：

1、"Qigao" product quality period is from the factory12Month, practice“Three packs”Service (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.，
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.EG6B41J British standard normally closed pneumatic rubber lined diaphragm valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!